用户登录  |  用户注册
首 页商业源码原创产品编程论坛
当前位置:PB创新网文章中心编程技巧编程其他

iczelion tut22

减小字体 增大字体 作者:佚名  来源:本站整理  发布时间:2009-03-16 19:24:45

Tutorial 22: Superclassing


In this tutorial, we will learn about superclassing, what it is and what it is for. You will also learn how to provide Tab key navigation to the controls in your own window.
Download the example here

Theory:

In your programming career, you will surely encounter a situation where you need several controls with *slightly* different behavior. For example, you may need 10 edit controls which accept only number. There are several ways to achieve that goal:
  • Create your own class and instantiate the controls
  • Create those edit control and then subclass all of them
  • Superclass the edit control
The first method is too tedious. You have to implement every functionality of the edit control yourself. Hardly a task to be taken lightly. The second method is better than the first one but still too much work. It is ok if you subclass only a few controls but it's going to be a nightmare to subclass a dozen or so controls. Superclassing is the technique you should use for this occasion.
Subclassing is the method you use to *take control* of a particular window class. By *taking control*, I mean you can modify the properties of the window class to suit your purpose then then create the bunch of controls.
The steps in superclassing is outlined below:
  • call GetClassInfoEx to obtain the information about the window class you want to superclass. GetClassInfoEx requires a pointer to a WNDCLASSEX structure which will be filled with the information if the call returns successfully.
  • Modify the WNDCLASSEX members that you want. However, there are two members which you MUST modify:
    • hInstance  You must put the instance handle of your program into this member.
    • lpszClassName  You must provide it with a pointer to a new class name.
      You need not modify lpfnWndProc member but most of the time, you need to do it. Just remember to save the original lpfnWndProc member if you want to call it with CallWindowProc.
  • Register the modifed WNDCLASSEX structure. You'll have a new window class which has several characteristics of the old window class.
  • Create windows from the new class
Superclassing is better than subclassing if you want to create many controls with the same characteristics.

Example:

.386
.model flat,stdcall
option casemap:none
include masm32includewindows.inc
include masm32includeuser32.inc
include masm32includekernel32.inc
includelib masm32libuser32.lib
includelib masm32libkernel32.lib

WM_SUPERCLASS equ WM_USER+5
WinMain PROTO :DWORD,:DWORD,:DWORD,:DWORD
EditWndProc PROTO :DWORD,:DWORD,:DWORD,:DWORD

.data
ClassName  db "SuperclassWinClass",0
AppName    db "Superclassing Demo",0
EditClass  db "EDIT",0
OurClass db "SUPEREDITCLASS",0
Message  db "You pressed the Enter key in the text box!",0

.data?
hInstance dd ?
hwndEdit dd 6 dup(?)
OldWndProc dd ?

.code
start:
    invoke GetModuleHandle, NULL
    mov    hInstance,eax
    invoke WinMain, hInstance,NULL,NULL, SW_SHOWDEFAULT
    invoke ExitProcess,eax

WinMain proc hInst:HINSTANCE,hPrevInst:HINSTANCE,CmdLine:LPSTR,CmdShow:DWORD
    LOCAL wc:WNDCLASSEX
    LOCAL msg:MSG
    LOCAL hwnd:HWND

    mov wc.cbSize,SIZEOF WNDCLASSEX
    mov wc.style, CS_HREDRAW or CS_VREDRAW
    mov wc.lpfnWndProc, OFFSET WndProc
    mov wc.cbClsExtra,NULL
    mov wc.cbWndExtra,NULL
    push hInst
    pop wc.hInstance
    mov wc.hbrBackground,COLOR_APPWORKSPACE
    mov wc.lpszMenuName,NULL
    mov wc.lpszClassName,OFFSET ClassName
    invoke LoadIcon,NULL,IDI_APPLICATION
    mov wc.hIcon,eax
    mov wc.hIconSm,eax
    invoke LoadCursor,NULL,IDC_ARROW
    mov wc.hCursor,eax
    invoke RegisterClassEx, addr wc
    invoke CreateWindowEx,WS_EX_CLIENTEDGE+WS_EX_CONTROLPARENT,ADDR ClassName,ADDR AppName,
        WS_OVERLAPPED+WS_CAPTION+WS_SYSMENU+WS_MINIMIZEBOX+WS_MAXIMIZEBOX+WS_VISIBLE,CW_USEDEFAULT,
           CW_USEDEFAULT,350,220,NULL,NULL,
           hInst,NULL
    mov hwnd,eax

    .while TRUE
        invoke GetMessage, ADDR msg,NULL,0,0
        .BREAK .IF (!eax)
        invoke TranslateMessage, ADDR msg
        invoke DispatchMessage, ADDR msg
    .endw
     mov eax,msg.wParam
    ret
WinMain endp

WndProc proc uses ebx edi hWnd:HWND, uMsg:UINT, wParam:WPARAM, lParam:LPARAM
    LOCAL wc:WNDCLASSEX
    .if uMsg==WM_CREATE
        mov wc.cbSize,sizeof WNDCLASSEX
        invoke GetClassInfoEx,NULL,addr EditClass,addr wc
        push wc.lpfnWndProc
        pop OldWndProc
        mov wc.lpfnWndProc, OFFSET EditWndProc
        push hInstance
        pop wc.hInstance
        mov wc.lpszClassName,OFFSET OurClass
        invoke RegisterClassEx, addr wc
        xor ebx,ebx
        mov edi,20
        .while ebx<6
            invoke CreateWindowEx,WS_EX_CLIENTEDGE,ADDR OurClass,NULL,
                 WS_CHILD+WS_VISIBLE+WS_BORDER,20,
                 edi,300,25,hWnd,ebx,
                 hInstance,NULL
            mov dword ptr [hwndEdit+4*ebx],eax
            add edi,25
            inc ebx
        .endw
        invoke SetFocus,hwndEdit
    .elseif uMsg==WM_DESTROY
        invoke PostQuitMessage,NULL
    .else
        invoke DefWindowProc,hWnd,uMsg,wParam,lParam
        ret
    .endif
    xor eax,eax
    ret
WndProc endp

EditWndProc PROC hEdit:DWORD,uMsg:DWORD,wParam:DWORD,lParam:DWORD
    .if uMsg==WM_CHAR
        mov eax,wParam
        .if (al>="0" && al<="9") (al>="A" && al<="F") (al>="a" && al<="f") al==VK_BACK
            .if al>="a" && al<="f"
               sub al,20h
            .endif
            invoke CallWindowProc,OldWndProc,hEdit,uMsg,eax,lParam
            ret
        .endif
    .elseif uMsg==WM_KEYDOWN
        mov eax,wParam
        .if al==VK_RETURN
            invoke MessageBox,hEdit,addr Message,addr AppName,MB_OK+MB_ICONINFORMATION
            invoke SetFocus,hEdit
        .elseif al==VK_TAB
            invoke GetKeyState,VK_SHIFT
            test eax,80000000
            .if ZERO?
                invoke GetWindow,hEdit,GW_HWNDNEXT
                .if eax==NULL
                    invoke GetWindow,hEdit,GW_HWNDFIRST
                .endif
            .else
                invoke GetWindow,hEdit,GW_HWNDPREV
                .if eax==NULL
                    invoke GetWindow,hEdit,GW_HWNDLAST
                .endif
            .endif
            invoke SetFocus,eax
            xor eax,eax
            ret
        .else
            invoke CallWindowProc,OldWndProc,hEdit,uMsg,wParam,lParam
            ret
        .endif
    .else
        invoke CallWindowProc,OldWndProc,hEdit,uMsg,wParam,lParam
        ret
    .endif
    xor eax,eax
    ret
EditWndProc endp
end start
 

Analysis:

The program will create a simple window with 6 "modified" edit controls in its client area. The edit controls will accept only hex digits. Actually, I modified the subclassing example to do superclassing. The program starts normally and the interesting part is when the main window is created:

    .if uMsg==WM_CREATE
         mov wc.cbSize,sizeof WNDCLASSEX
        invoke GetClassInfoEx,NULL,addr EditClass,addr wc

We must first fill the WNDCLASSEX structure with the data from the class which we want to superclass, in this case, it's EDIT class. Remember that you must set the cbSize member of the WNDCLASSEX structure before you call GetClassInfoEx else the WNDCLASSEX structure will not be filled properly. After GetClassInfoEx returns, wc is filled with all information we need to create a new window class.

        push wc.lpfnWndProc
        pop OldWndProc
        mov wc.lpfnWndProc, OFFSET EditWndProc
        push hInstance
        pop wc.hInstance
        mov wc.lpszClassName,OFFSET OurClass

Now we must modify some members of wc. The first one is the pointer to the window procedure. Since we need to chain our own window procedure with the original one, we have to save it into a variable so we can call it with CallWindowProc. This technique is identical to subclassing except that you modify the WNDCLASSEX structure directly without having to call SetWindowLong. The next two members must be changed else you will not be able to register your new window class, hInstance and lpsClassName. You must replace original hInstance value with hInstance of your own program. And you must choose a new name for the new class.

        invoke RegisterClassEx, addr wc

When all is ready, register the new class. You will get a new class with some characteristics of the old class.

        xor ebx,ebx
        mov edi,20
        .while ebx<6
            invoke CreateWindowEx,WS_EX_CLIENTEDGE,ADDR OurClass,NULL,
                 WS_CHILD+WS_VISIBLE+WS_BORDER,20,
                 edi,300,25,hWnd,ebx,
                 hInstance,NULL
            mov dword ptr [hwndEdit+4*ebx],eax
            add edi,25
            inc ebx
        .endw
        invoke SetFocus,hwndEdit

Now that we registered the class, we can create windows based on it. In the above snippet, I use ebx as the counter of the number of windows created. edi is used as the y coordinate of the left upper corner of the window. When a window is created, its handle is stored in the array of dwords. When all windows are created, set input focus to the first window.
At this point, you got 6 edit controls which accept only hex digits. The substituted window proc handles the filter. Actually, it's identical to the window proc in subclassing example. As you can see, you don't have to do extra work of subclassing them.

I throw in a code snippet to handle control navigation with tabs to make this example more juicy. Normally, if you put controls on a dialog box, the dialog box manager handles the navigation keys for you so you can tab to go to the next control or shift-tab to go back to the previous control. Alas, such feature is not available if you put your controls on a simple window. You have to subclass them so you can handle the Tab keys yourself. In our example, we need not subclass the controls one by one because we already superclassed them, so we can provide a "central control navigation manager" for them.
 

        .elseif al==VK_TAB
            invoke GetKeyState,VK_SHIFT
            test eax,80000000
            .if ZERO?
                invoke GetWindow,hEdit,GW_HWNDNEXT
                .if eax==NULL
                    invoke GetWindow,hEdit,GW_HWNDFIRST
                .endif
            .else
                invoke GetWindow,hEdit,GW_HWNDPREV
                .if eax==NULL
                    invoke GetWindow,hEdit,GW_HWNDLAST
                .endif
            .endif
            invoke SetFocus,eax
            xor eax,eax
            ret

The above code snippet is from EditWndClass procedure. It checks if the user press Tab key, if so, it call GetKeyState to check if  the SHIFT key is also pressed. GetKeyState returns a value in eax that determines whether the specified key is pressed or not. If the key is pressed, the high bit of eax is set. If not, the high bit is clear. So we test the return value against 80000000h. If the high bit is set, it means the user pressed shift+tab which we must handle separately.
If the user press Tab key alone, we call GetWindow to retrieve the handle of the next control. We use GW_HWNDNEXT flag to tell GetWindow to obtain the handle to the window that is next in line to the current hEdit. If this function returns NULL, we interpret it as no more handle to obtain so the current hEdit is the last control in the line. We will "wrap around" to the first control by calling GetWindow with GW_HWNDFIRST flag. Similar to the Tab case, shift-tab just works in reverse.


Tags:

作者:佚名

文章评论评论内容只代表网友观点,与本站立场无关!

   评论摘要(共 0 条,得分 0 分,平均 0 分) 查看完整评论
PB创新网ourmis.com】Copyright © 2000-2009 . All Rights Reserved .
页面执行时间:1,000.00000 毫秒
Email:ourmis@126.com QQ:2322888 蜀ICP备05006790号